CHROME
OUTER MOST POLISHED ALUMINUM MOLDING ON W/S PILLAR. CURLED AT TOP, ACTS AS RAIN GUTTER.Article code: v.nr.1076981001
RADIATOR GRILLE SCREEN LEFT Grille Screen Center LEFT/Driver side
REAR FENDER MOLDING (left) ALL SLS BODY SIDE MOLDING AFTER DOOR AND IN FRONT OF REAR WHEEL.
REAR FENDER MOLDING LEFT - ALL SLCS BODY SIDE MOLDING AFTER DOOR AND IN FRONT OF REAR WHEEL.
REAR FENDER MOLDING (right) ALL SLS BODY SIDE MOLDING AFTER DOOR AND IN FRONT OF REAR WHEEL
CHROME EYELET MOUNTED IN REAR CENTER OF SOFT TOP WELL LID COVER FOR LOCK PIN OF BOTH TOPS.
POLISHED ALUMINUM MOLDING UNDER DOOR GOING FROM WHEEL TO WHEEL. FOR MOUNTING PAD & CLIPS, SEE # 69-3528, 69-3526, & 69-3512L.
POLISHED ALUMINUM MOLDING UNDER DOOR AND GOING FROM WHEEL TO WHEEL. FOR MOUNTING PAD & CLIPS, SEE # 69-3528, 69-3526, & 69-3512R
14 PER CAR FOR SLs / 16 PER CAR FOR SLCs. PLASTIC BARREL CLIP GROMMET MOUNTED INTO ROCKER PANEL TO ACCEPT MALE CLIP # 69-3528.
14 PER CAR FOR SLs / 16 PER CAR FOR SLCs. FLAT HEADED PLASTIC CLIP SLIDES INTO BACK OF ROCKER MLD.
(RIGHT) Large Head - SEE DETAILSRUBBER BASE SEAL FOR THE FOLLOWING: 450SL 107.044 FROM 029705 TO END 450SLC 107.024 FROM 011996 TO END 380SL 107.045 ALL 380SLC 107.025 ALLArticle code: v.nr.1078110661
(Left) Large Head - SEE DETAILSRUBBER BASE SEAL FOR THE FOLLOWING: 450SL 107.044 FROM 029705 TO END 450SLC 107.024 FROM 011996 TO END 380SL 107.045 ALL 380SLC 107.025 ALLArticle code: v.nr.1078110561
CHROME MOLDING ON OUTER EDGE OF SOFT TOP WELL LID. HARDTOP RESTS ON THIS MOLDING WHEN USED.
CHROME MOLDING ON OUTER EDGE OF SOFT TOP WELL LID. HARDTOP RESTS OF THIS MOLDING WHEN USED.
TOP LOCK COVER (left) ALL SLS from 1982-89 LARGE CHROME COVER ON TOP OF DOOR JAMB, ACCEPTS HARDTOP LOCKS DIRECTLY BEHIND FRONT SEATS.
LARGE CHROME COVER MOUNTED ON TOP OF DOOR JAMB. ACCEPTS HARDTOP LOCKS DIRECTLY BEHIND FRONT SEATS. TOP LOCK COVER (right) ALL SLS from 1982-85
LARGE CHROME COVER MOUNTED ON TOP OF DOOR JAMB. ACCEPTS HARDTOP LOCKS DIRECTLY BEHIND FRONT SEAT. ALL SL to 1981
LARGE CHROME COVER MOUNTED ON TOP OF DOOR JAMB, ACCEPTS HARDTOP LOCK DIRECTLY BEHIND FRONT SEAT. ALL SL to 1981
Article code: v.nr.1078171415
CHROME HANDLE MOUNTED ON REAR OF TRUNK LID BELOW TRUNK STAR.Article code: v.nr.1077580202
PLEASE STATE V.I.N.# IN THE SHIPPING INSTRUCTIONS BOX AT CHECKOUT. LOCK CYLINDER WITH KEY.Article code: v.nr.1077501285
NO LONGER AVAILABLE!!! CONTINUATION OF CENTER TRUNK MOLDING # 69-3448, MOUNTS ON REAR BODY PANEL ABOVE LEFT REAR TAIL LAMP.Article code: v.nr.1076901380
NO LONGER AVAILABLE !!! CONTINUATION OF CENTER TRUNK MOLDING # 69-3448, MOUNTED ON REAR BODY PANEL JUST ABOVE RIGHT REAR TAIL LAMPArticle code: v.nr.1076901480
PART IS NO LONGER AVAILABLE CENTER HORIZONTAL MOLDING ON REAR BODY PANEL JUST BELOW WHERE TRUNK LID MEETS THE BODY. HOUSES TRUNK LOCK CYLINDER AND LICENSE LAMPS. PART IS NO LONGER AVAILABLE
CHROME STAR AND RING MOUNTED ON REAR OF TRUNK LID ABOVE HANDLE. SLCs ONLY. FOR SLs, SEE 75-3010 & 375-200L.
CHROME STAR & RING MOUNTED ON REAR OF TRUNK LID. FOR 560SL S, SEE # 375-200L FOR ALL SLCs, SEE # 75-3009.
WILL ALSO NEED 3 GROMMETS # 75-3213Article code: v.nr.1077580458
3 PER CAR FOR TRUNK STAR # 75-3200Article code: v.nr.2019972281
POLISHED ALUMINUM MOLDING IN LOWER CORNER OF WINDSHIELD. 450SL FROM 001985 TO END 450SLC FROM 000702 TO END 380SL ALL 380SLC ALL 560SL ALLArticle code: v.nr.1076713530
POLISHED ALUMINUM MOLDING IN LOWER CORNER OF WINDSHIELD. 450SL FROM 001985 TO END 450SLC FROM 000702 TO END 380SL ALL 380SLC ALL 560SL ALLArticle code: v.nr.1076713630
4 PIECE WHEEL ARCH CHROME MOLDING SET COMPLETE WITH INSTALLATION SCREW SET. LONG VERSION RUNS FROM BUMPER END ALL THE WAY OVER AND DOWN TO THE ROCKER PANEL MOLDING.
4 PIECE WHEEL ARCH CHROME MOLDING SET COMPLETE WITH INSTALLATION SCREW SET. SHORT VERSION RUNS FROM BUMPER END OVER TO BODY SIDE MOLDING. AVAILABLE LONG VERSION RUNS FROM BUMPER END ALL THE WAY OVER AND DOWN TO THE ROCKER PANEL MOLDING.