W121/PONTON URETHANE SUSPENSION KIT 22MM
Produktinformationen "W121/PONTON URETHANE SUSPENSION KIT 22MM"
190SL URETHANE SUSPENSION KIT
BUSHINGS ONLY YOU WILL NEED TO REUSE YOUR EXISTING HARDWARE
NOTE: Before selecting a front sway bar frame bushing, please measure the bar diameter first.
Use either a flexible tape or a pair of calipers as shown. Do not use a flat ruler.
With Calipers
With flexible tape
If using an inch tape – take measurement and divide by 3.142 to get the diameter. To convert from inches to mm, simply multiply by 25.4. In both cases, this sway bar measures 24mm.
Anmelden