repair kit (NF) for the air compressors of the Mercedes W100 / W109 / W112 here - extended by the ball bearing (version W109 / 112) which should also be replaced when reassembling. The special version of the ball bearing for W100 air compressors is available on request for an additional € 30.
Incl. the required head and housing seals as well as the flutter valve.
The repair kit is no longer available from Mercedes.
The seal kit fits the following types of Knorr Bremse air compressors (see type plate)
- I / 25141 (LP1004)
- I / 26848
- I / 27635 (LP1100)
- I / 33421 (LP1101)
- I / 34977 (LP1102)
- I / 42134 (LP1110)
- I / 42409 (LP1111)
- I / 46818 (LP1113)
all air compressors of the W100, W109 and W112.
PLASTIC VALVE MOUNTED ON FIREWALL AND OPERATED BY A VACUUM ELEMENT(INCLUDED) TO ALLOW ENGINE COOLANT TO FLOW TO HEATER CORE. 450SL 107.044 FROM 021762 UP TO 042309. 450SLC 107.024 FROM 008208 UP TO 019097Article code: v.nr.1078
PLASTIC VALVE MOUNTED ON FIREWALL AND OPERATED BY A VACUUM ELEMENT(INCLUDED) TO ALLOW ENGINE COOLANT TO FLOW TO HEATER CORE. 450SL 107.044 FROM 021762 UP TO 042309. 450SLC 107.024 FROM 008208 UP TO 019097Article code: v.nr.1078
LOCATED AT TOP OF PUMP IN HOUSING WITH WATER INLET AND OUTLET. WILL LOOK DIFFERENT FROM PICTURED ITEM AS PICTURE IS FROM A 230SL.Article code: v.nr.0012039575
Specifications: 12V 40W, 120 Deg C Max. -20 Deg C, 9.5 sec., 35 Deg C, +- 3 Deg C
350 SL
71-73 Cha- 107.043
350 SL
71-73 Ch- 107.044
350 SLC
71-73 Ch- 107-023
450 SL
73-76 Ch-107.044 to 030108 Fed. To 019516 Ca.
450 SLC
72-76 Ch 107.024 to 030108 Fed. To 019516 Ca.
450 SE
73-75 Ch- 116.032
450 SEL
73-75 Ch- 116.033
280 SE Coupe 3.5
69-71 Ch- 111.026 From 010307
280 SE Coupe 3.5 Conv
69-71 Ch-111.026
280 SE 4.5
71-72
280 SEL 4.5
71-72
300 SEL 3.5
71 From 007780
300 SEL 4.5
72-73
